Axagon USB 3.2 Gen 1 docking station for up to 2 HDDs/SSDs at the same time
Hind ei sisalda käibemaksu.
Toode on tellitav.
Tehnilised andmed
https://www.axagon.eu/en/produkty/adsa-st
Input | |
interface | USB 3.0 / USB 2.0 / USB 1.1 |
rate | 5000 / 480 / 12 Mbit/s (super / high / full speed) |
connector | USB 3.0 Type B female (on the docking station) |
connector | USB Type A male (on the cable) |
cable | 70 cm, disconnectable |
Output | |
interface | Serial ATA 3.1 |
rate | 6 / 3 / 1.5 Gbit/s (SATA III / SATA II / SATA I) |
connector | 2x 22-pin SATA data and power female |
compatibility | all SATA I / SATA II / SATA III disks |
total permeability | 5 Gbit/s theoretically (given by USB 3.0 input) |
Supported device | |
2.5" | yes (SATA HDD/SSD) |
3.5" | yes (SATA HDD) |
5.25" | no |
max. disk capacity | all, without limitations |
max. height of 2.5" disk | all, without limitations |
Supported features | |
disk cloning | yes (without connection to a PC) |
UASP | yes |
TRIM | no |
S.M.A.R.T. | yes |
boot from connected disk | yes |
putting disk to sleep | yes (HDD Auto Spindown / 10 min) |
disk turning off | yes (HDD Turn Off) |
automatic installation | yes |
Plug and Play | yes |
Hot Plug | yes |
Other features | |
design | aluminum / plastic |
screwless mounting | yes |
indication | green LED - power supply turned on (permanently on) |
indication | 2x blue LED - each for one disk, disk connection (permanently on), data transmission (flashes) |
indication | 4x LED 25%-50%-75%-100% - cloning takes place (flashes), cloning finished (permanently lit) |
controls | power switch |
controls | CLONE button - triggers disk cloning |
dimensions | 142 x 102 x 80 mm |
weight | 330 g (without accessories) |
Power supply | |
on the bus | no |
through power adapter | yes (power adapter included) |
OS support | |
MS Windows | 10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions) |
MS Windows Server | 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions) |
Mac OS | X 10.x and higher |
Linux | kernel 2.6.x and higher |